United Security Products AVD-45c Guía de usuario Pagina 235

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 410
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 234
3
Specifying Settings From the Control Panel
3-124 cm4520
Specifying Settings From the Control Panel Chapter 3
3.31 SNMP Settings
SNMP settings can be specified.
SNMP Parameters
The SNMP parameters are as follows:
The v1/v2c settings that can be specified are described below.
Item Description
SNMP Setting Specify whether to use SNMP.
SNMP v1/v2c(IP) Select whether to use SNMP v1/v2c (IP).
SNMP v3(IP) Select whether to use SNMP v3 (IP).
SNMP v1(IPX) Select whether to use SNMP v1 (IPX).
UDP Port Number Specify the UDP port number. To change the value, press
the [C] (clear) key, and then use the keypad to type in the
value (between 1 and 65535).
[v1/v2c Setting] Specify when you want to select v1 or v2c. For details on
specifying the setting, refer to “v1/v2c Setting” on
page 3-126.
[v3 Setting] Specify when v3 is selected. For details on specifying the
setting, refer to “v3 Setting” on page 3-127.
Item Description
Write Setting Specify whether to enable the write setting.
Read Community Name Specify the read community name. The default setting is
“public”. Use the keyboard that appears in the touch panel
to type in the read community name.
Write Community Name Specify the write community name. The default setting is
“private”. Use the keyboard that appears in the touch panel
to type in the write community name.
Vista de pagina 234
1 2 ... 230 231 232 233 234 235 236 237 238 239 240 ... 409 410

Comentarios a estos manuales

Sin comentarios