United Security Products AVD-45c Guía de usuario Pagina 164

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 410
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 163
Specifying Settings From the Control Panel
3
cm4520 3-53
Specifying Settings From the Control Panel Chapter 3
IP Filtering
The IP addresses in the specified ranges can be permitted or denied.
1 In TCP/IP Setting screen 5/5, touch [IP Filtering].
The IP Filtering > Permit Access screen appears.
2 Touch [Enable] or [Disable] under “Permit Access”.
3 Touch the button for a set (Set 1 to Set 5), and then use the keypad to
type in the address range.
The range setting cannot include “0.0.0.0”. For example, to specify
all addresses before 192.168.1.20, specify the range from 0.0.0.1 to
192.168.1.20.
Touch [Deny Access] to specify the IP addresses to refuse access.
The procedure for setting the IP addresses is the same as on the
Permit Access screen.
To edit the values that you entered, touch [] or [] to move the
cursor to the desired area, touch [Delete], and enter the new value.
To clear all values, press the [C] (clear) key.
4 Touch [OK].
IP filtering is set.
Vista de pagina 163
1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 409 410

Comentarios a estos manuales

Sin comentarios