United Security Products AD-2000 Manual de usuario descargar pdf (Pagina 2)

Spotwave Wireless Inc.

1 Hines Road, Suite 204, Ottawa ON, K2K 3C7 Canada | E-mail: support@spotwave.com | www.spotwave.com

Appendix A- United Security Products AD-2000

Overview

The following outlines configuration information specific to the United Security Products AD-2000

auto dialer.

AD2000 Features

The AD2000 dialer has the following features:

• 4 voice message alarm zones.

• Calls up to 8 telephones, pagers, or cell phones.

• Automatically redials busy or unanswered numbers.

• Built in line seizure.

• Remote turn off feature allows termination of activated channel.

• EEPROM memory retains program despite power loss.

• Listen in verification permits 2-way voice communication.

Note: The AD2000 has 4 alarm contact inputs that can support 4 different SpotCell CUs.

Configuration

Before the automatic dialer can be used it must first be configured.

A look at the Keypad

NUMERALS: Press these keys to enter telephone numbers and other programming information. A

maximum of 50 digits can be input in each phone/pager location.

P: Press this key to program in a pause. Each “P” provides a 2-second pause.

R: Press this key to record the combination of identification and directional outgoing messages

(OGMs). The total elapsed OGM time cannot exceed 51 seconds.

M: Press this key to change the Mode of the dialer, in sequence:

PROGRAM > TEST > OPERATE > OFF.

1 2 3 4 5 6

Sin comentarios

United Security Products AD-2000 Manual de usuario Pagina 2